Boeing Flight Simulators: Checklist in FSX for PMDG B777

=====================================================================================

For pilots looking to immerse themselves into the world of commercial aviation, flight simulators have become a staple. Among these simulators is Microsoft's popular FSX (Flight Simulator X), which has seen numerous updates and expansions over the years.

One such expansion that has captured the attention of many serious aviators is the PMDG B777 series for FSX. Developed by renowned simulator manufacturer PMDG, this product offers an incredibly detailed representation of one of Boeing's most iconic aircraft: The 777-200ERLR (Long Range).

However, even with all its realism and authenticity, flying a real-life commercial airliner can be daunting at first - especially when it comes to adhering to strict safety protocols. This is where checklists come into play.

In this article, we'll take you through the various pre-flight procedures that pilots must complete before every flight in FSX's PMDG B777-200LRER (Long Range) variant, as well as some additional tips and tricks along the way.

Pre-Takeoff Checklist

----------------------

Before pushing back from gate C27 at LAX or whatever departure airport you've chosen for your virtual journey, make sure to complete each of these essential steps in order:

1. Start Engines: Move the Start/Left Main switch on both engines to 'START' and wait until all systems are online.

2. Set Altitude & Heading: Engage the Auto-Trim system by selecting ALT Hold (ALT) from your control panel, then set heading using either theHeading Select Knob or Control Yoke/Airbus-style joystick.

3. Run Prestart Checks: This includes priming both engines with fuel, advancing throttle levers to 100%, and performing a full systems check via the Primary Flight Display (PFD).

4. Complete External Ground Equipment Check: Ensure that all external ground equipment such as stairs and jetways are safely secured before taxiing.

5. Set Taxi Speed & Brakes: Engage parking brake by depressing the Parking Brake switch fully, then set your desired taxi speed using either the Throttle Lever or Control Stick/Joystick.

6. Configure Autobrake (Optional): If equipped with an autobrake system on your virtual B777-200LRER variant, now is a good time to engage it via the appropriate switches located near your left leg under the control panel.

Taxiing & Takeoff

----------------

With all pre-flight checks complete and your PMDG B777 ready for departure, carefully taxi out onto Runway 07R at LAX (or whichever runway you've selected) following standard airport procedures. Remember to keep a constant eye on both Primary Flight Display (PFD) and Heading Select Indicator (HSI) as well as maintaining proper separation from other aircraft and ground vehicles.

Once clear of all obstacles, advance your throttle levers gradually until reaching takeoff speed (180 knots indicated). smoothly rotate the nose upwards while advancing further into climb-out mode. Maintain a steady pitch attitude throughout departure phase before transitioning up through various altitudes set within FSX's weather conditions editor or third-party add-ons like Global AI Traffic v4.

In-Flight Procedures

----------------------

Once airborne, pilots must adhere to numerous safety protocols both during normal cruising phases as well as in case of emergency situations such as engine failures or fires. In this article we'll focus on the latter two scenarios:

### Engine Failure Checklist

1. Identify Failed Engine: Quickly scan gauges and warning lights for indications that one of your engines has failed.

2. Shut Down Affected Engine(s): Move corresponding Start/Stop lever to 'SHUTDOWN' then advance throttle levers fully back until RPMs decay below 1000 revolutions per minute (RPM).

3. Configure Alternate Air Source: Engage alternate air system by pulling respective handle located near the failed engine cowling.

4. Descend & Establish Prefailure Config.: Gradually descend to a safe altitude before configuring flight controls for single-engine operation.

### Engine Fire Checklist

1. Identify Smouldering Flames: Lookout for smoke or flames emanating from exhausts on either side of your fuselage.

2. Secure Throttle Levers & Retract Gear: Immediately advance thrust levers to 'MAXIMUM' then pull the corresponding gear lever fully into its retracted position.

3. Configure Firefighting Systems.: Engage fire extinguishing agents via appropriate switches located near cockpit or cabin overhead panels depending on variant fitted.

4. Initiate Emergency Descent & Landingsite Selection: Immediately descend to a safe altitude before selecting an emergency landing site using either visual references or instrument flying techniques if necessary.

5. Finish with full flap extension and maximum brake application as soon as possible after touchdown

-------

And there you have it - a comprehensive guide through the various checklists pilots must complete when operating PMDG's Boeing 777-200LRER in FSX. From start-up procedures to emergency landing scenarios, adhering strictly to these safety protocols will ensure a safe and enjoyable flight every time.

Remember: flying is fun but only if done safely!

Chekclist in fsx pmdg 777?